Building Tiny Linux Systems with Busybox, Part 2: Building the Kernel
For this example I use Linux kernel version 2.2.17. The 2.4.0-test8 kernel that I tried did not size the RAM disk for the root file system properly, leading to a ``not enough memory'' message at boot time. That bug will probably be repaired in the 2.4 series of kernels by the time you read this.
We will build our example to run on an i386-architecture PC-compatible system with PC keyboard and VGA display, booting from a floppy disk and running the root file system entirely in RAM once the system is booted. This example should also boot from IDE disks and from FLASH EEPROM devices that masquerade as IDE disks. It can also be configured to boot from a CD-ROM.
Build a bzImage-style kernel with all of the facilities needed for the application, plus these three:
RAM disk support (in the Block Devices menu)
Initial RAM disk (initrd) support (also in the Block Devices menu)
ROM file system support (in the File Systems menu)
Don't use kernel modules, because this example system doesn't support them. Don't put any facilities in the kernel that you don't need, as they will use up space that you need on the floppy disk. A kernel with the facilities you need should be around half a megabyte in size and should fit easily on a floppy along with the ROM root file system. A kernel with many unnecessary bells and whistles will be a megabyte or more and won't leave sufficient room for your ROM root file system.
If you're not familiar with building and installing kernels on a normal Linux PC, you'll need to study up on that. In short, I placed the kernel sources in /usr/src/linux and ran:
xhost +localhost su make xconfig make dep make bzImage
This created a compiled Linux kernel in /usr/src/linux/arch/i386/boot/bzImage.
In the busybox source directory, edit the Makefile, changing the variable DOSTATIC from false to true. Then run make. That will create a static-linked version of busybox. Confirm that it is static-linked by running this command:
ldd busybox
This should print something like:
statically linked (ELF)It's important to get this right; if you install a dynamic-linked version of Busybox, your system won't run because we aren't installing the runtime dynamic linker and its libraries on the floppy disk for this example.
We're going to go through all of the steps for creating a minimal root file system by hand so that you will understand just how little is necessary to boot your system rather than copying all of the files from the root of your Linux distribution and then being afraid to remove anything because you don't know whether it's necessary. You will need to become root (the superuser) to perform the following steps because the mknod command requires superuser privilege.
Create the tiny-linux directory and change directory into it:
mkdir tiny-linux cd tiny-linux
Create the standard directories in it:
mkdir dev etc etc/init.d bin proc mnt tmp var var/shm chmod 755 . dev etc etc/init.d bin proc mnt tmp var var/shmEnter the tiny-linux/dev directory:
cd devCreate the generic terminal devices:
mknod tty c 5 0 mknod console c 5 1 chmod 666 tty console #Allow anyone to open and write terminals.Create the virtual terminal device for the VGA display:
mknod tty0 c 4 0 chmod 666 tty0Create the RAM disk device:
mknod ram0 b 1 0 chmod 600 ram0Create the null device, used to discard unwanted output:
mknod null c 1 3 chmod 666 nullChange directory to tiny-linux/etc/init.d, where startup scripts are stored:
cd ../etc/init.dUse an editor to create this shell script in tiny-linux/etc/init.d/rcS. It will be executed when the system boots:
#! /bin/sh mount -a # Mount the default file systems mentioned in /etc/fstab.Make the script executable:
chmod 744 rcSChange directory to tiny-linux/etc:
cd ..Use an editor to create the file tiny-linux/etc/fstab, which says what file systems should be mounted at boot time:
proc /proc proc defaults 0 0 none /var/shm shm defaults 0 0Set the mode of tiny-linx/etc/fstab:
chmod 644 fstabUse an editor to create the file tiny-linux/etc/inittab, which tells /bin/init, the system startup program, what processes to start:
::sysinit:/etc/init.d/rcS ::askfirst:/bin/shThe above example runs the script /etc/init.d/rcS at boot time and runs an interactive shell on the console device.
Set the modes of tiny-linux/etc/inittab:
chmod 644 inittab
That's everything necessary to create your root file system, except for the installation of the programs. Change directory to tiny-linux/bin:
cd ../binCopy your static-linked version of Busybox from wherever you built it into tiny-linux/bin/busybox with a command similar to this one:
cp ~/busybox-0.46/busybox busyboxAdd another command name ls to Busybox using the ln command:
ln busybox lsRun ls, and the result should look like this:
-rwxr-xr-x 2 root root 580424 Sep 12 15:17 busybox -rwxr-xr-x 2 root root 580424 Sep 12 15:17 lsRepeat the above ln command for all of these names:
[, ar, basename, cat, chgrp, chmod, chown, chroot, chvt, clear, cp, cut, date, dc, dd, deallocvtdf, dirname, dmesg, du, dumpkmap dutmp, echo, false, fbset, fdflush, find, free, freeramdisk, fsck.minix, grep, gunzip, gzip, halt, head, hostid, hostname, id, init, insmod, kill, killall, length, linuxrc, ln, loadacm, loadfont, loadkmap, logger, logname, lsmod, makedevs, md5sum, mkdir, mkfifo, mkfs.minix, mknod, mkswap, mktemp, more, mount, mt, mv, nc, nslookup, ping, poweroff, printf, ps, pwd, reboot, rm, rmdir, rmmod, sed, setkeycodes, sh, sleep, sort, swapoff, swapon, syn, c syslogd, tail, tar, tee, telnet, test, touch, tri, true, tty, umount, uname, uniq, update, uptime, usleep, uudecode, uuencode, wc, which, whoami, yes, zcatAre you tired yet? Well, now is a good time to take a break--you've finished creating your ROM root file system.
You'll need the genromfs program to generate the ROM file system image. If you are using Debian or Red Hat, it's already packaged for you as part of the standard system; you'll just need to run the command to install it. If your Linux distribution doesn't include a prepackaged version, at this writing the program can be found at ftp://ibiblio.org/pub/Linux/system/recovery/genromfs-0.3.tar.gz. Install the program, change directory to the directory that contains tiny-linux and run these commands:
genromfs -d tiny-linux -f fs
This creates the ROM file system image in the file fs. Now, compress the file system image using the gzip command:
gzip -9 fsThat will create the file fs.gz, which is about half the size of the uncompressed version.
We'll need one more program to build our floppy: syslinux. This is an i386 bootstrap program that will load a kernel and a compressed root file system image from a floppy, hard disk or CD. Again, it's prepackaged with Debian or Red Hat and can be found, at this writing, at ftp://ibiblio.org/pub/Linux/system/boot/loaders/syslinux-1.48.tar.gz.
Create an MS-DOS file system on a floppy by using the Linux mformat command (or by another means). Put the floppy in your drive but don't mount it, and install the syslinux bootstrap with this command:
syslinux /dev/fd0
That will copy a first-stage bootstrap onto the first block of the floppy and a second-stage bootstrap into the file LDLINUX.SYS in the MS-DOS file system of the floppy. I'm assuming you have a directory called /mnt; substitute whatever directory you usually use for mounting floppy disks in the shell commands below. Now, it's time to copy our kernel and root file system onto the floppy:
mount -t msdos /dev/fd0 /mnt cp fs.gz /mnt cp /usr/src/linux/arch/i386/boot/bzImage /mnt/linuxCreate the configuration file /mnt/syslinux.cfg with an editor:
TIMEOUT 20 DEFAULT linux LABEL linux KERNEL linux APPEND root=/dev/ram0 initrd=fs.gzThis tells syslinux to wait for two seconds and then boot the default system. You can interrupt the default boot during those two seconds by pressing the shift key. Typing linux at the prompt will do the same thing as the default.
The kernel is booted with the arguments root=/dev/ram0 and initrd=fs.gz. These arguments tell the kernel that the root is a RAM disk, and that the RAM disk is loaded from the compressed ROM file system image fs.gz. Although the ``ROM'' root file system is actually in RAM, it will not be writable because the Linux ROM file system driver used in this example is meant to work with real ROMs and thus doesn't support writing.
Configure an i386 PC to boot from the floppy. Note that this is a setting in the BIOS preferences of most new PCs, and they are often configured to boot from the hard disk without first looking for a bootstrap on the floppy. Place the floppy in the first floppy drive, and restart the system. You should see something like the following:
SYSLINUX 1.48 1999-09-26 Copyright (C) 1994-1999 H. Peter Anvin loading fs.gz......... loading linux............... Uncompressing linux, OK, booting the kernel
Tons of cybercrud about every device driver and facility in the kernel race by too rapidly to read...
RAMDISK: Compressed image found at block 0. VFS: Mounted root (romfs file system) Please press Enter to activate this console.You've done it! Press Enter and you should see something like this:
Busybox v0.46 (2000-09-12-22:16+0000) built-in shell Enter 'help' for a list of built-in commands. / # _Pop out the floppy disk; it's not being used any longer. The root file system is entirely in RAM. You should be able to look around the system and try out commands, but you won't have any writable storage. This is the simplest, bootable-system, running busybox that I could think of, and thus I've left out the files in /dev that you'd need to mount writable RAM disks, floppies and hard disks. You now should be able to figure out what those devices are, add them and build a tiny Linux system specialized to your application.
email: bruce@perens.com